The correct maintenance posture of the syrup filling machine, have you set it up?
Among the many filling machines, the brand image of the syrup filling machine is attracting attention, and it is also fierce in the industry. Syrup is an essential medicine for children in the family. The syrup filling machine filled with syrup does not fill as extensively as filling edible oil or beverage. It has strict requirements on the filling environment and the filling quantity. This requires the equipment produced by the filling machine manufacturer to be technically up to standard. After all, no one wants to return to the factory for maintenance. People often say that there is competition in order to have a market. There is also a constant competition in the market. In fact, competition is not only a catalyst for promoting the market industry to become specialized, but also a product of the industry. A high level of platform.
Factors affecting the speed of the syrup filling machine:
The syrup filling machine needs to adjust the spring pressure of the valve in the accuracy of filling. It should be determined by the test filling and the experience of the operator. The switching speed of the thickened valve mainly adjusts the spring pressure of the valve. When the spring pressure increases, the switching speed of the valve is increased. In contrast, the speed is slowed down. The speed error of the syrup filling machine is mainly determined by the filling amount, the filling speed, and the switching speed of the upper and lower valves. The switching speed of the upper and lower valves is related to the viscosity of the product. The higher the viscosity, the slower the valve switching speed.
The usual use of the syrup filling machine will directly affect the performance of the filling machine. If you encounter a failure in the filling machine, how to maintain the posture:
Solenoid valve failure mainly manifests as the cylinder does not move or does not reset, because the cylinder solenoid valve can not be reversed or helium. If the solenoid valve is suffocating, the air pressure of the syrup filling machine will not reach the working pressure due to the communication between the inlet and outlet gas lines, and the knives will not rise. The knife beam protection proximity switch does not work, the preconditions for the operation of the syrup filling machine are not established, and the syrup filling machine cannot be operated, which is easily confused with electrical failure. The solenoid valve has a leaking sound in the helium gas. The correct maintenance posture carefully listens to the sound source and searches for the leak point by hand. Generally, it is easy to find the solenoid valve of the helium gas. The repair method is to clean the solenoid valve and replace the damaged seal. If it is impossible to repair, replace the solenoid valve. Are you set up?